Peel and Stick Wallpaper
Preparation:
After receiving your package, the wallpaper should be removed from its packaging and seasoned in the room in which it is to be pasted for at least 48 hours. The temperature of such a room cannot be lower than 18°C, the recommended temperature is 20°C and humidity at around 50%. We also recommend that you unroll your wall murals for the seasoning period. Before mounting your self-adhesive wallpaper, unpack it with the print facing upwards, placing it on a dry, clean and flat surface and make sure that the product does not have any manufacturing defects. If the wallpaper consists of more than one piece, check if the pattern is joined correctly.
How to prepare the surface?
The surface on which the installation is to be carried out should be dry and clean – free of dust and greasy stains. It is recommended to apply the wallpaper on a light, even and smooth surface. In the case of new, freshly painted walls, it is recommended that the wallpaper is applied at the earliest 14 days after the completion of finishing works, maintaining the target temperature in the room.
Please note:
The wall should not be covered with washable paint – such as latex or ceramic paint. Such surfaces are not conducive to adhesive bonding and the wallpaper will fall off. If the wall is covered with this type of paint or primer – you should evenly matt/abrade the surface with sandpaper.
Self-adhesive wallpaper
- Use a pencil to draw guide lines at the edges of the mural/sticker using a plumb line or spirit level.
- Carefully peel off the top piece of backing protecting the adhesive layer.
- Stick the upper part of the wall mural / sticker to the wall. Gradually peel off other parts of the backing while pressing the wall mural to the decorated surface.
- Using your hands, a squeegee or a wallpaper roller, smooth the surface of the mural successively from top to bottom and from inside to outside. This will ensure proper adhesion and remove any air bubbles that may have formed during application.
- Repeat the steps above while installing the other panels of the wallpaper.
Please note:
The air temperature during the wallpaper/sticker application and within 48 hours of application must not be below 18°C – the recommended temperature is 20°C with approx. 50% humidity. Although all products are made from high quality material, they should be handled with care, bearing in mind that the print has limits to its resistance to mechanical abrasion and stretching. The manufacturer guarantees the high quality of the product, but is not responsible for the conditions and manner of its use. Regardless of the level of experience and skills, the manufacturer recommends professional assistance in each case.